The Next Generation of Underground Intelligence
AI-powered subsurface verification that gives excavation crews confidence before they break ground.
An Ongoing Problem
A Buried Utility Is Struck Every 6 Minutes
Excavation follows a defined process:
Call 811
Use GPR or other locating methods
Prepare to dig
But the process stops short of confirming what’s directly beneath the surface at the exact point of excavation.
Markings and scans provide guidance. However, they do not verify the precise dig location in real time. That’s the gap.
GroundScope
The Final Verification Step Before You Dig
GroundScope is an AI powered subsurface verification tool designed for everyday excavation work.
It adds a fast verification step right before digging begins, helping crews confirm underground conditions at the exact point of dig.
GroundScope does not replace 811 or GPR. It works alongside them to provide real time underground insight when it matters most.
Key Benefits
Why Crews Choose GroundScope
Rapid Adoption:
Train operators in minutes and begin scanning immediately.
No Certification Required:
Operate without certified GPR technicians or complex interpretation.
Real-Time Feedback:
Receive immediate results directly on the device.
Rugged Design:
Lightweight, rugged hardware designed for real jobsites.
Features & Capabilities
Built for Real Jobsites
Detachable sled for trench scanning
Boat-hull sled for smooth push/pull scanning
Detachable handle
Integrated kickstand
Lightweight design
Milwaukee M18 battery
IP65-rated battery compartment
How It Works
Scan. Verify. Dig.
Step 1: Scan the Area
Move GroundScope across the intended excavation zone. As the device scans the ground, it captures subsurface signals from below the surface.
Step 2: Get Instant Results
GroundScope analyzes the scan data in real time using AI powered detection. Clear feedback is displayed directly on the device so you can quickly understand whether potential utilities or anomalies may be present.
Step 3: Mark & Dig With Confidence
Use the results to mark areas of concern and guide excavation planning. With better visibility into what may lie beneath the surface, you can proceed with greater confidence and reduce the risk of costly surprises.
Use Cases / Applications
The Industries That Work Below the Surface
Utilities
Verify underground infrastructure before maintenance, upgrades, and emergency repairs.
Construction
Reduce risk during trenching, excavation, and large-scale civil infrastructure projects.
Government
Support public works, transportation, and municipal infrastructure programs.
Defense
Improve subsurface awareness for sensitive sites and mission critical operations.
Technical Specifications
Built for Real Jobsites
Physical Design
- Weight: <21 lbs
- IP65-rated battery compartment
Faster Reporting:
- Milwaukee M18 battery platform
- Hot-swap battery capability
Fleet Visibility:
- Recommended scan speed: ~1 ft per second
- Typical scan length: 10 ft in under 30 seconds
- Processing time: ~2 seconds per foot scanned
Built-in QA:
- Utility Risk Cloud integration
- GPS tagging for scan documentation
Reusable Data:
- Boat-hull sled for smooth scanning
- Detachable handle for flexible operation
- Integrated kickstand for stability
Utility Risk Cloud
Where Field Scans Become Job Intelligence
GroundScope captures subsurface scan data in the field and sends it to the Utility Risk Cloud, where it is automatically organized into structured job records.
Instead of isolated scans, your team builds a documented history of underground conditions, scan activity, and verification steps across every project.
This gives crews, supervisors, and project owners clear documentation of what was scanned and when.
An active Utility Risk Cloud subscription is required to operate GroundScope and access AI powered scan analysis.
Frequently Asked Questions
Everything You Need to Know
What does GroundScope do?
GroundScope is a subsurface verification tool that helps crews confirm underground conditions before excavation begins and creates documentation that can be reviewed and shared across teams.
Does GroundScope replace 811?
No. GroundScope complements 811 markings by adding a verification step before excavation begins.
Does it replace Subsurface Utility Engineering (SUE)?
No. SUE provides detailed engineering surveys. GroundScope helps verify underground conditions right before digging starts.
What utilities can it detect?
GroundScope can find buried pipes, wires, and irrigation.
When should GroundScope be used?
GroundScope is typically used after 811 markings and before excavation begins to verify underground conditions at the intended dig location.
Many crews also use GroundScope during excavation through progressive scanning to maintain visibility as digging continues.
How long does a typical scan take?
It depends on area size and required confidence level. A standard 10ft scan takes less than 30 seconds. Scan at a pace of 1ft per second. Then allow for the table to process the scan, which takes about 2-seconds per foot scanned.
Do I need a specialist to operate it?
No. GroundScope was designed for ease of use and most operators can learn the workflow in about ten minutes.
Can we use the hardware without the subscription?
The short answer is no. The Basic plan is required to access our AI and use GPS location.
How is GroundScope different from traditional GPR?
GroundScope is designed for fast verification directly at the point of dig. It focuses on ease of use and immediate feedback so crews can confirm underground conditions quickly without requiring specialized interpretation.
Lorem Ipsum Dolor
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.